Skip to content

Med size SAM GPS

M10038 isometric view M10038 top view M10038 bottom view

The 3DR SAM GNSS is a low-cost module based on U-Blox SAM M10Q GNSS receiver.

Compared to the IST, the IST8308 has less temperature drift, more sensitivity, and a built-in noise filter. Older GPS versions used the LIS3MDL, which doesn’t even come close to the performance of the old IST8310, let alone the IST8308.

Purchase
Loading 3D model…
Specifications3DR SAM GPS + IST8308 Mag (Medium Size) M10038
Ground Plane31mm x 31mm
ConstellationsUSA (GPS), Russia(GLONASS), and Europe (Galileo). China can be enabled (BeiDou).
CompassIST8308
BarometerNo
RTK readyNo
USB PortNo
CAN readyNo
Minimum and Maximum Operating Temperature-20 ~ 80 °C
LEDYes
Dimensions36mm x 31mm x 11.5mm
Weight8.3 grams (0.29 oz)
Mounting HolesNo
CaseOptional
Connectors6-Pin JST-GH
Auxiliary Port I²C
Includes1x GPS ublox Sam M10Q
1x 6-Pins JST-GH to 6-Pins JST-GH – MRC0206
1x 6-Pins JST-GH to 6 Separate 2.54mm Females – MRC0202
Typical PlatformsMultirotor
Rover
Fixed-Wing
Boats
VTOL
Automatic Tractors
Others
Other FeaturesLightest GPS version, 7.86 grams (.28 oz)
PPS/GND signal pads
Rechargeable battery
Status LED
Standard JST-GH (GPS and I2C)

There are no firmware updates for SAM based modules.

This module is compatible with:

ArduPilot

  • Arducopter 4.x
  • ArduPlane 4.x
  • ArduRover 4.x

PX4

  • V1.10
  • V1.9
  • V1.8

All connectors follow the Dronecode connector standard. Unless noted otherwise, all connectors are JST-GH.

PinColorSignalTTL/Voltage Level
1redVCC5V
2blackI2C_SCL (pull-up on autopilot)3V3
3blackI2C_SDA (pull-up on autopilot)3V3
4blackGNDN/A
PinColorSignalTTL/Voltage Level
1redVCC5V
2blackRXD3V3
3blackTXD3V3
4blackI2C_SCL3V3
5blackI2C_SDA3V3
6blackGNDN/A
PilotGNSS
VCCVCC
TXRX
RXTX
I2C_SCLI2C_SCL
I2C_SDAI2C_SDA
GNDGND
Download Step File